Reference Guide
BIOSSetupAdvancedMode
Table 5. BIOSSetupAdvancedMode
Attribute Name Description
AdvancedMode
Enabling BIOS Setup Advanced Mode makes all BIOS settings visible.
Possible values:
• Enabled
• Disabled
BootSequence
Table 6. BootSequence
Attribute Name Description
BootList
Determines the system’s boot mode.
Possible values:
• Ue — Enables booting to Unied Extensible Firmware Interface (UEFI) capable operating
systems.
• Legacy — (the default) Ensures compatibility with operating systems that do not support
UEFI.
NOTE: Legacy boot mode is not allowed when secure boot is enabled or legacy option
ROM is disabled.
BootSequence
Species the order in which a system searches for devices when trying to nd an operating
system to boot. The BootSequence option allows users to customize the boot order and boot
ability of boot devices. The UEFI BIOS allows the selection of UEFI boot paths or Legacy boot
devices.
IntelSoftwareGuardExtensions
Table 7. IntelSoftwareGuardExtensions
Attribute Name Description
EnclaveSize Displays the memory allocation size for the Intel Software Guard Extension (SGX)
processor reserved memory.
Possible values:
• 32MB
• 64MB
• 128MB
• 256MB
NOTE: You cannot set the Enclave Reserve Memory Size using the Dell
Command | PowerShell Provider. One of the methods of setting Enclave
Reserve Memory Size is from the BIOS setup screen.
SgxLaunchControl
Sets the Intel Software Guard Extensions Launch Control Policy.
8 Attributes supported in Dell Command | PowerShell Provider 2.2