Reference Guide

Attribute Description
TrustExecution
Determines whether a Measured Virtual Machine Monitor (MVVM) can utilize the additional
hardware capabilities provided by the Intel Trusted Execution Technology.
NOTE: TPM has to be enabled and activated. Also, Virtualization Technology and VT
for Direct I/O must be enabled to use this feature.
Possible values:
• Enabled
• Disabled
Virtualization
Enables or disables the VT technology in applicable CPUs. Trusted execution required for
Virtualization technology to be enabled.
Possible values:
• Enabled
• Disabled
VtForDirectIo
Determines whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology for Direct IO.
Possible values:
• Enabled
• Disabled
PcieLinkSpeed
Congures PCIe LinkSpeed.
Possible values:
• auto - PCIe link speed is congured based on the maximum speed supported by both
upstream and downstream devices.
• gen1 - The PCIe link speed is congured in Gen1.
• gen2 - The maximum PCIe link speed that allows to be congured is limited to Gen2.
Wireless
Table 29. Wireless
Attribute Name Description
BluetoothDevice
Enables or disables the internal Bluetooth device.
Possible values:
• Enabled
• Disabled
LidMountedWirelessActivityLED
This additional LED is mounted in the lid in a visible position.
Possible values:
• Always O — The LED always stays o irrespective of network activity.
• LED Indicates Wireless Activity Status — The LED becomes active whenever any of the
wireless devices are capable of connecting to a wireless network. Wireless activity is dened
as the following three inputs:
– WWAN activity
– Bluetooth activity
Attributes supported in Dell Command | PowerShell Provider 2.2 65