Reference Guide

Attribute Name Description
Possible values:
• 0 to 100
FanSpdAutoLvlonPsuZone
Sets the speed of the fan on PSU zone
Possible values:
• 0 to 100
FanSpdAutoLvlonCpuMemZone
Sets the speed of the fan on CPU memory zone
Possible values:
• 0 to 100
FanSpdAutoLvlonPcieZone
Sets the speed of the fan on PCIe zone
Possible values:
• 0 to 100
FanSpdAutoLvlonFlexBayZone
Sets the speed of the fan on Flex Bay zone
Possible values:
• 0 to 100
FanSpdAutoLvlonUpperPcieZone
Sets the speed of the fan on Upper PCIe zone
Possible values:
• 0 to 100
TPMSecurity
Table 25. TPMSecurity
Attribute Name Description
PpibypassSedBlockSidCommand
When there is no drive ownership and the PpibypassSedBlockSidCommand is enabled, the BIOS
requires user input while sending the Block SID authentication command to SED drives. When
PpibypassSedBlockSidCommand is disabled, BIOS does not require user input while sending the
Block SID command.
Possible values:
• Disabled
• Enabled
NOTE: You can disable PpibypassSedBlockSidCommand in manufacturing mode
or while setting up the BIOS Setup Administrator password.
SHA256
Sets the hash algorithm used for TPM 2.0 measurements.
Possible values:
• Disabled — Sets hash algorithm to SHA-1.
• Enabled — Sets hash algorithm to SHA-256.
• SHA384 — Sets hash algorithm to SHA-384.
• SHA512 — Sets hash algorithm to SHA-512.
54 Attributes supported in Dell Command | PowerShell Provider 2.2