Reference Guide

Attribute Name Description
• Disabled
Touchscreen
Enables or disables the touchscreen.
Possible values:
• Enabled
• Disabled
UeNwStack
This option is disabled by default. If enabled, UEFI Networking protocols are installed/available,
allowing pre-OS and early OS networking features to use the enabled NICs. This option may be
used without turning on PXE.
Possible values:
• Enabled
• Disabled
UnobtrusiveMode
Enables or disables the toggling of light emissions using hotkey Fn+B.
Possible values:
• Enabled — Pressing Fn+B will toggle light emissions from the system.
• Disabled — Pressing Fn+B keys has no eect and will not toggle light emissions from the
system.
UsbPowerShare
Congures the USB PowerShare feature behavior.
Possible values:
• Enabled — Charges the external devices, such as phones and laptop music players, using the
stored system battery when the system is turned o or in sleep mode. This feature works
only if:
– The device is connected through the USB PowerShare port on the laptop.
– The system is connected to an AC power source.
– The battery charge is less than 50 percent.
• Disabled — Turns o this feature, and devices attached to the USB PowerShare port will not
be charged when the system is in a sleep mode or turned o.
Vmdnvmepcie0
Enables or disables the VMD for Front NVMe Port (PCIE0).
Possible values:
• Enabled
• Disabled
Vmdnvmepcie1
Enables or disables the VMD for Front NVMe Port (PCIE1).
Possible values:
• Enabled
• Disabled
Vmdnvmepcie0cpu1
Enables or disables the VMD for Front NVMe Port (PCIE0-CPU1).
Possible values:
• Enabled
• Disabled
Vmdnvmepcie1cpu1
Enables or disables the VMD for Front NVMe Port (PCIE1-CPU1).
Attributes supported in Dell Command | PowerShell Provider 2.2 51