Reference Guide

Attribute Name Description
PowerButton
Enables, disables, or partially disables the power button.
Possible values:
• Enabled
• Disabled
• Partial disable
PwrOWlanStealthMode
Enables or disables PwrOWlanStealthMode.
Possible values:
• Enabled — Disconnects power from the Intel 8260 Wireless NIC when Stealth Mode is
enabled.
• Disabled — Does not disconnect power from the Intel 8260 Wireless NIC when Stealth Mode
is enabled.
NOTE: Disabling Stealth Mode does not automatically restore the power or
functionality of the card until the next complete boot. This non-standard mode is
available as an option for Stealth Mode control of the Intel 8260 card for the following
use cases: Pre-boot applications, Linux OS, or Windows OS without Dell
recommended drivers.
SfpNic
Enables or disables Small Formfactor Pluggable (SFP) device.
Possible values:
• Disabled — Disables the SFP device.
• Enabled — Enables the SFP device.
• EnabledPxe - Enables the SFP device with PXE support.
Sata0
Enables or disables the rst SATA drive controller.
Possible values:
• Enabled
• Disabled
Sata1
Enables or disables the second SATA drive controller.
Possible values:
• Enabled
• Disabled
Sata2
Enables or disables the third SATA drive controller.
Possible values:
• Enabled
• Disabled
Sata3
Enables or disables the fourth SATA drive controller.
Possible values:
• Enabled
• Disabled
Sata4
Enables or disables the fth SATA drive controller.
48 Attributes supported in Dell Command | PowerShell Provider 2.2