Reference Guide

Attribute Name Description
Possible values:
• 5s — Keyboard backlight stays on for 5 seconds.
• 10s — Keyboard backlight stays on for 10 seconds.
• 15s — Keyboard backlight stays on for 15 seconds.
• 30s — Keyboard backlight stays on for 30 seconds.
• 1m — Keyboard backlight stays on for 1 minute.
• 5m — Keyboard backlight stays on for 5 minutes.
• 15m — Keyboard backlight stays on for 15 minutes.
• Never — Keyboard backlight always stays on.
KbdBacklightTimeoutBatt
Congures the time-out value for the keyboard backlight when the system is running only on
battery power.
Possible values:
• 5s — Keyboard backlight stays on for 5 seconds.
• 10s — Keyboard backlight stays on for 10 seconds.
• 15s — Keyboard backlight stays on for 15 seconds.
• 30s — Keyboard backlight stays on for 30 seconds.
• 1m — Keyboard backlight stays on for 1 minute.
• 5m — Keyboard backlight stays on for 5 minutes.
• 15m — Keyboard backlight stays on for 15 minutes.
• Never — Keyboard backlight always stays on.
KeyboardBacklightActiveColor
Displays or sets an active color for the keyboard backlight in a rugged system. 6 colors are
available: four predened colors (white, red, green, blue), and two user congurable colors
(custom1 and custom2). Active color indicates the color used on startup. Any one of the 6 colors
can be chosen as an active color.
Possible value:
• White
• Red
• Green
• Blue
• Custom1
• Custom2
KeyboardBacklightCustom1Color
Congures the Custom1 color by specifying the RGB values by mentioning it in 'R:G:B' format.
Each color component value ranges from 0 to 255.
Possible values: [0-255]:[0-255]:[0-255]
KeyboardBacklightCustom2Color
Congures the Custom2 color by specifying the RGB values by mentioning it in 'R:G:B' format.
Each color component value ranges from 0 to 255.
Possible values: [0-255]:[0-255]:[0-255]
KeyboardBacklightEnabledColors
Displays or enables the supported colors for the keyboard backlight in the rugged systems. 6
colors are available: 4 predened colors (white, red, green, blue), and 2 user-congurable colors
(custom1 and custom2). Multiple colors out of the 6 colors can be enabled at the same time.
After enabling colors, you can switch among the enabled colors by pressing <Fn+C> keys.
Enabling NoColor means that the keyboard backlight is turned o.
Possible values: Either combination of,
• White
• Red
44 Attributes supported in Dell Command | PowerShell Provider 2.2