Reference Guide

Attribute Name Description
ForcePxeNextBoot
Enables or disables Force PXE on next boot in BIOS.
Possible values:
• Enabled — If enabled, when the BIOS boots next time, the rst PXE-capable device is
inserted as the rst device in the boot sequence. Enabling this value causes this operation on
the next boot only, and does not cause a change in the dened boot sequence of the system.
The BIOS chooses the rst PXE-capable device as the onboard network controller of the
system, if present and enabled, or the rst bootable network device found in the standard
PCI search order of the system, whichever comes rst.
• Disabled — If disabled, the boot override feature is disabled and the system boot sequence is
in eect.
FrontPowerButton
Enables or disables the front power button.
Possible values:
• Enabled
• Disabled
Hdd1FanEnable
Enables or disables the automatic fan controller, an error check of a fan. If a fan is detected, this
function is automatically enabled. Disabling the fan requires physical removal of the HDD fan.
Possible values:
• Enabled
• Disabled
Hdd2FanEnable
Enables or disables the automatic fan controller, an error check of a fan. If a fan is detected, this
function is automatically enabled. Disabling the fan requires physical removal of the HDD2 fan.
Possible values:
• Enabled
• Disabled
Hdd3FanEnable
Enables or disables the automatic fan controller, an error check of a fan. If a fan is detected, this
function is automatically enabled. Disabling the fan requires physical removal of the HDD3 fan.
Possible values:
• Enabled
• Disabled
IgnitionSwitchEnable
Enables or disables the external ignition pin. Disabled by default.
Possible values:
• Enabled
• Disabled
IgnitionSwitchOnDelay
The delay is displayed in seconds when the power button event is passed to the OS to initiate a
boot of the system.
Possible values are from (0 - 21600). By default the value is 5s.
IgnitionSwitchODelay
The delay is displayed in seconds untill the power button event is passed to the OS for shutting
down the system.
Possible values are from (0 - 21600). By default the value is 5s.
IgnitionSwitchDebounceCycle
De-Bounce Ignition Power Switch cycle time is displayed in milli-seconds.
42 Attributes supported in Dell Command | PowerShell Provider 2.2