Reference Guide

Attribute Name Description
Possible values:
• Disabled
• Enabled
• EnabledPxe
• OnWithImageServerBoot
• EnabledwithRPLBoot
• EnabledwithISCSIBoot
EmbNic2
Controls the state of on-board LAN controller 2.
Possible values:
• Disabled
• EnabledPXE
• Enabled
• EnabledwithImageServerBoot
• EnabledwithRPLBoot
• EnabledwithISCSIBoot
EmbSataRaid
Congures the operating mode of the integrated SATA hard drive controller.
Possible values:
• Disabled — The SATA controllers are hidden.
• Ata — SATA is congured for ATA mode.
• Ahci — SATA is congured for AHCI mode.
• Raid — SATA is congured to support RAID mode (Intel Rapid Restore Technology).
Emmcdevice
Enables or disables the eMMC drive.
Possible values:
• Enabled
• Disabled
FingerprintReader
Enables or disables the Fingerprint Reader device.
Possible values:
• Enabled - Fingerprint Reader device is enabled.
• Disabled - Fingerprint Reader device is disabled.
FingerprintReaderSingleSignOn
Enables or disables the FingerprintReaderSingleSignOn.
Possible values:
• Enabled - FingerprintReaderSingleSignOn is enabled.
• Disabled - FingerprintReaderSingleSignOn is disabled.
ForcePXEasFirstBootDevice
Enables or disables Preboot Execution Environment (PXE) as the rst boot device for all
subsequent boots.
Possible values:
• Enabled
• Disabled
Attributes supported in Dell Command | PowerShell Provider 2.2 41