Reference Guide

Attribute Name Description
• DACOutput — Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC — Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO — Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel
2
Sets the dened Analog or Digital Interface mode for channel 2.
Possible values:
• Unused — Channel is unused.
• ADCInput — Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput — Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC — Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO — Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel
3
Sets the dened Analog or Digital Interface mode for channel 3.
Possible values:
• Unused — Channel is unused.
• ADCInput — Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput — Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC — Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO — Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel
4
Sets the dened Analog or Digital Interface mode for channel 4.
Possible values:
• Unused — Channel is unused.
• ADCInput — Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput — Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC — Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO — Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel
5
Sets the dened Analog or Digital Interface mode for channel 5.
Possible values:
• Unused — Channel is unused.
• ADCInput — Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput — Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC — Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO — Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel
6
Sets the dened Analog or Digital Interface mode for channel 6.
Possible values:
• Unused — Channel is unused.
• ADCInput — Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput — Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC — Sets the channel mode as DAC output, but can be monitored through ADC
input.
Attributes supported in Dell Command | PowerShell Provider 2.2 39