Reference Guide

SupportAssistSystemResolution
Table 20.
Attribute Description
AutoOSRecoveryThreshold
Sets the threshold value for auto OS recovery.
Possible values: 0 to 3
Controls the automatic boot ow for SupportAssist System Resolution console and for
Dell OS Recovery Tool. The system boots to the SupportAssist System Resolution
console and for Dell OS Recovery Tool if;
• the primary operating system fails to boot consecutively
• the count of boot failure is greater than or equal to the value of the Auto OS
Recovery threshold setup option
• SupportAssist OS Recovery option is enabled
NOTE: If Auto OS Recovery threshold is set to 0, then all automatic boot ow
for SupportAssist System Resolution console and for Dell OS Recovery Tool
will be disabled.
BiosConnect
Enables or Disables BIOS Connect feature.
Possible values:
• Enabled
• Disabled
SupportAssistOSRecovery
Enables or disables the boot ow for SupportAssist OS recovery tool in the event of
certain system errors.
Possible values:
• Enabled
• Disabled
MpmCfg
This feature controls the level of monitoring of Memory Performance Monitor (MPM).
MPM monitors the memory for faults and perform fault recovery when possible.
Possible values:
• OFF
• Low
• Med
• High
SystemConguration
Table 21.
SystemConguration
Attribute Name Description
AnalogDigitalInterfaceModeChannel1
Sets the dened Analog or Digital Interface mode for channel 1.
Possible values:
• Unused — Channel is unused.
• ADCInput — Sets the channel mode as Analog-to-Digital Converter (ADC) input.
38 Attributes supported in Dell Command | PowerShell Provider 2.2