Reference Guide

Attribute Name Description
Possible values:
• Enabled
• Disabled
HDDInfo
Displays the details of each HDD. The following information is displayed:
• HDDName — The name of the HDD.
• Present — Whether the HDD is physically present.
• PwdProtected — Whether a password exists for the HDD.
• PendingRestart — Whether a reboot is pending to set the password.
• AdminOnlyChange — Whether the changes to the password can be made only by an
administrator.
• SecureEraseSupported — Whether HDD Secure Erase is supported.
• SecureEraseEnabled — Whether HDD Secure Erase is enabled.
Possible values: Read-only
HDDPassword
Sets, changes, or clears the HDD password. Enter the HDD password, if set, when the
system is powered on.
NOTE: After setting the HDD password, restart the system.
Possible values: String containing minimum 1 and maximum 32 characters including
whitespace.
HddProtection
Lets the user choose loading of HDD Protection OPROM.
IntlPlatformTrust
Enables or disables IntlPlatformTrust feature.
Possible values:
• Enabled — Displays the Intel Platform Trust Technology (PTT) device from the operating
system on the next boot.
• Disabled — Hides the Intel Platform Trust Technology (PTT) device from the operating
system on the next boot.
NOTE: When disabled, the PTT device is not displayed to the operating system,
and no changes can be made to the PTT device or its content.
IsAdminPasswordSet
Species if an admin password has been set.
Possible values: True, false (Read-only)
IsSystemPasswordSet
Species if a system password has been set.
Possible values: True, false (Read-only)
MasterPasswordLockout
Enables or disables master password settings.
CAUTION: Using the Dell Command | PowerShell Provider, you cannot disable this
feature.
Possible values:
• Enabled — The master password cannot be used to:
– clear other passwords
– unlock and access Hard Disk Drive
– erase data from Hard Disk Drive.
• Disabled — The master password can be used to:
– clear other passwords
34 Attributes supported in Dell Command | PowerShell Provider 2.2