Reference Guide

Attribute Name Description
NOTE: For best results while diagnosing potential memory DIMM issues,
turn o this feature prior to running diagnostic functions or tools.
• Disabled - AMD Transparent Secure Memory Encryption (TSME) does not allow
encryption on the memory DIMMS.
CapsuleFirmwareUpdate
Enables or disables BIOS updates via UEFI capsule update packages.
Possible values:
• Enabled
• Disabled
ChasIntrusion
The chassis intrusion switch is a physical switch which triggers an event when the chassis is
opened.
Possible values:
• Enabled — The system detects and reports chassis intrusion events to the system
display on boot-up.
• Disabled — The system does not detect and report the Chassis Intrusion events to the
system display on boot-up.
• SilentEnable — The system detects, but does not report the Chassis Intrusion events to
the system display on boot-up.
ChassisIntrusionStatus
Displays the status of chassis intrusion.
NOTE: Except TripReset, all values are read-only.
Possible values:
• DoorOpen — Indicates that chassis door is open.
• Tripped — Indicates that the chassis door was opened since the last time the sensor-
detection logic was reset.
• DoorClosed — Indicates that chassis door is closed.
• TripReset — Resets the sensor-detection logic to detect the next closed-to-open
transition on the chassis door.
Computrace
This feature allows the users to enable or disable Absolute Software's Computrace security
software BIOS ROM. After this token is written, the state is permanently maintained (this is a
write-once eld). This token is for Factory use only. Application and management software
must ignore this token. Write-once permanent is dierent from write-once. Write-once is
reset on a power cycle and/or chipset reset. Write-once permanent cannot be reset or
change once it is set.
Possible values:
• Disable
• Activate
NOTE: You cannot enable or disable this feature using Dell Command |
Congure.
CpuXdSupport
Enables or disables the run disable mode of the processor. The operating system can use this
feature to hinder software that exploits buer overows.
Possible values:
• Enabled
• Disabled
GeneralPurposeEncryption
Enables or disables general-purpose encryption.
Attributes supported in Dell Command | PowerShell Provider 2.2 33