Reference Guide

Attribute Description
DashSupport
Enables and disables the support for Desktop and Mobile Architecture for System Hardware
(DASH) management through Platform Level Data Model (PLDM) exchanges.
Possible values:
• Enabled
• Disabled
DisGpuExtDisplay
Enables or disables the platform external displays.
Possible values:
• Enabled — Allows discrete Graphics Processing Unit (dGPU) to enable the platform
external displays such as HDMI, NB DP and Type-C, etc. with the purpose of enabling
discrete graphic features such as Eyenity, Mosaic, 10bit DP displays, etc..
NOTE: Embedded Display Port (eDP) will be enabled by Integrated
Graphics Processing Unit (iGPU).
• Disabled — The normal hybrid graphics mode is enabled.
NOTE: This feature is used in hybrid graphics mode only.
ExpansionBay 1
Enables or disables Expansion Bay 1.
Possible values:
• Enabled
• Disabled
ExpansionBay 2
Enables or disables Expansion Bay 2.
Possible values:
• Enabled
• Disabled
ExpansionBay 3
Enables or disables Expansion Bay 3.
Possible values:
• Enabled
• Disabled
FaultTolerantMemLogClear
Enables or disables the Fault Tolerant Memory Log Clear option.
Possible values:
• Enabled — System clears fault tolerant memory log during the next boot.
• Disabled — Fault Tolerant Memory Log Clear option will be disabled, and no action will
be taken during the next boot.
NOTE: Fault Tolerant Memory Log Clear option will be reset to disabled state
after log gets cleared.
GpsWwan
Enables or disables GPS WWAN Radio.
Possible values:
• Enabled
• Disabled
GraphicSpecMode
Enables or disables the modes.
Attributes supported in Dell Command | PowerShell Provider 2.2 29