Reference Guide

Attribute Name Description
NOTE: Primary Battery Custom Charge Start percent must be less than the Primary
Battery Custom Charge End percent and the minimum dierence between the two must
be 5 percent.
Possible values: Integers ranging from 50 to 95
CustomChargeStop
Sets the percentage value ranging from 55 to 100 at which the custom battery charging should
stop.
NOTE: Primary Battery Custom Charge Start percentage must be less than the Primary
Battery Custom Charge End percent and the minimum dierence between the two must
be 5 percent.
Possible values: Integers ranging from 55 to 100
DeepSleepCtrl
Controls when Deep Sleep is enabled.
Possible values:
• Disabled
• S5Only
• S4AndS5
DockBatteryChargeConguration
Congures the dock battery charge mode.
Possible values:
• Standard — Charges the battery over a long period of time.
• Express — Charges the battery in Express Charge mode using Dell's fast charging technology.
FanCtrlOvrd
Runs the system fan at full speed.
Possible values:
• Enabled
• Disabled
FanSpeed
Sets the speed of the fan to Auto, High, Medium, Low, Medium High, or Medium Low. When set to
Auto, the system run time automatically sets the speed.
Possible values:
• Auto
• High
• Med
• Low
• MedHigh
• MedLow
FanSpeed
Sets the speed of the fan to Auto, High, Medium, Low, Medium High, or Medium Low. When set to
Auto, the system run time automatically sets the speed.
Possible values:
• Auto
• High
• Med
• Low
• MedHigh
• MedLow
24 Attributes supported in Dell Command | PowerShell Provider 2.2