Reference Guide

Attribute Name Description
Possible values:
• BeginningOfDay — To congure the AdvanceBatteryCharge start time in 24 hours format. The
value of hour must be in the range 0–23 and minute must be 0, 15, 30, or 45.
• Workperiod — To congure the duration of charging.
AdvBatteryChargeCfg
Enables or disables the Advanced Battery Charge conguration. During working hours, with the
Advanced Battery Charge conguration, the batteries can be charged faster using ExpressCharge.
Possible values:
• Enabled
• Disabled
AutoOn
Congures the days when the system has to turn on automatically at the time specied in
AutoOnHr and AutoOnMn. This function can turn on the system either every day, on weekdays, or
on selected days. If AutoOnHr is set to 23, and AutoOnTime is set to 53, then setting AutoOntime
to Weekdays turns on the system automatically on weekdays (Monday to Friday) at 11:53 p.m.. To
turn on the system on particular days, set AutoOnTime as Select Days, and then enable or disable
individual days by setting AutoOnSun -enabled, AutoOnMon -disabled, etc.
Possible values:
• Disabled
• EveryDay
• SelectDays
• Weekdays
AutoOnHr
Congures the hour when the system has to turn on automatically. Provide the value ranging from
0 to 23. To set the time 11:59 p.m., provide the value as 23.
Possible values: Integers ranging from 0 to 23
AutoOnMn
Congures the minute when the system has to turn on automatically. Provide the value ranging
from 0 to 59. To set the time 11:59 p.m., provide the value as 59.
Possible values: Integers ranging from 0 to 59
AutoOnSun
Enables or disables the AutoOn functionality at the specied time on Sundays.
Possible values:
• Enabled
• Disabled
AutoOnMon
Enables or disables the AutoOn functionality at the specied time on Mondays.
Possible values:
• Enabled
• Disabled
AutoOnTue
Enables or disables the AutoOn functionality at the specied time on Tuesdays.
Possible values:
• Enabled
• Disabled
AutoOnWed
Enables or disables the AutoOn functionality at the specied time on Wednesdays
22 Attributes supported in Dell Command | PowerShell Provider 2.2