Reference Guide

Attribute Name Description
Possible values:
• Enabled — Displays the system logo from cache during system resume using Intel Rapid Start
Technology.
• Disabled — Does not display the system logo from cache during system resume using Intel
Rapid Start Technology.
IntelSpdSelTech
Intel Speed Select Technology allows you to choose up to two additional base frequency
conditions.
Cfg 1: TDP Level 3
Cfg 2: TDP Level 4
Possible values:
• Conguration 1
• Conguration 2
IrstTimer
Sets the Intel Rapid Start Timer. The value can be specied in minutes ranging from 0 to 999.
Specify the Rapid Start timer value as 0 to put the system into a low-power state immediately
after the system transition to a sleep mode.
Possible values: Integer ranging from 0 to 999
LimitCpuidValue
Restricts the maximum CPUID functions supported by the processor. Some operating system
does not complete the installation when more than three CPUID functions are supported.
Possible values:
• Enabled
• Disabled
LogicProc
Enables or disables HyperThreading in the processor.
Possible values:
• Enabled
• Disabled
MultiCoreSupport
Species whether the processor has one or more cores enabled. The performances of some
applications improve with additional cores.
Possible values:
• CoresAll — All cores are enabled.
• Cores1 — Only one core is enabled.
• Cores2 — Two cores are enabled.
• Cores4— Four cores are enabled.
• Cores6— Six cores are enabled.
• Cores8— Eight cores are enabled.
• Cores10 — Ten cores are enabled.
• Cores12 — Twelve cores are enabled.
• Cores14 — Fourteen cores are enabled.
• Cores16 — Sixteen cores are enabled.
NodeInterleave
Enables or disables memory interleave mode.
Possible values:
• Enabled
16 Attributes supported in Dell Command | PowerShell Provider 2.2