Reference Guide

Performance
Table 12. Performance
Attribute Name Description
AdjCachePrefetch
Enables or disables the AdjacentCacheLinePrefetch feature.
Possible values:
• Enabled - CPU fetches the adjacent cache line in the other half of the sector.
• Disabled - CPU only fetches the cache line that contains the data currently required by the
CPU.
CPUCore
This eld species whether the processor has one or more cores enabled. The performance of
some applications improve with additional cores.
Possible values:
• CoresAll— All cores are enabled.
• Cores1 — Only one core is enabled.
• Cores2 — Two cores are enabled.
• Cores3 — Three cores are enabled.
• Cores4 — Four cores are enabled.
• Cores5 — Five cores are enabled.
• Cores6 — Six cores are enabled.
• Cores7 — Seven cores are enabled.
• Cores8 — Eight cores are enabled.
• Cores9 — Nine cores are enabled.
• Cores10 — Ten cores are enabled.
• Cores11 — Eleven cores are enabled.
• Cores12 — Twelve cores are enabled.
• Cores13 — Thirteen cores are enabled.
• Cores14 — Fourteen cores are enabled.
• Cores15 — Fifteen cores are enabled.
• Cores16 — Sixteen cores are enabled.
• Cores17 — Seventeen cores are enabled.
• Cores18 — Eighteen cores are enabled.
• Cores19 — Nineteen cores are enabled.
• Cores20 — Twenty cores are enabled.
• Cores21 — Twenty one cores are enabled.
• Cores22 — Twenty two cores are enabled.
• Cores23 — Twenty three cores are enabled.
• Cores24 — Twenty four cores are enabled.
• Cores25 — Twenty ve cores are enabled.
• Cores26 — Twenty six cores are enabled.
• Cores27 — Twenty seven cores are enabled.
• Cores28 — Twenty eight cores are enabled.
CpuSnoopMode
Congures the CPU snoop mode.
Possible values:
• Early — Enables early snoop mode. Use this mode for latency-sensitive applications that do
not require high remote bandwidth.
14 Attributes supported in Dell Command | PowerShell Provider 2.2