Reference Guide

Attribute Name Description

• Disabled — Restricts the system to downgrade the system BIOS.

BiosAutoRcvr

Enables or disables BIOS auto recovery feature.

Possible values:

• Enabled — If BIOS corruption is detected, the system automatically recovers BIOS

without any user interaction.

• Disabled — Disables BIOS auto recovery feature.

NOTE: You can enable this option only if BiosRcvrFrmHdd option is enabled.

BiosIntegrityCheck

Enables or disables the BIOS integrity check during the booting process.

Possible values:

• Enabled — BIOS checks the BIOS image integrity during every booting process.

• Disabled — BIOS checks the BIOS image integrity only if the previous booting process

did not complete.

NOTE: BIOS checks the BIOS image integrity only if the BiosAutoRcvr option is

enabled.

BiosRcvrFrmHdd

Enables or disables the system BIOS Recovery option. This feature saves a recovery image

to a primary hard disk drive storage, or to an external USB, and uses this recovery image to

recover the BIOS image when system BIOS fails.

Possible values:

• Enabled — BIOS stores the recovery image on a primary hard disk drive storage. So the

BIOS recovery image is available both from the primary hard disk drive permanent

storage and via an external USB.

• Disabled — BIOS does not store the recovery image on primary hard disk drive storage.

So the BIOS recovery image is available only via an external USB.

Serr

Enables or disables the SERR on the DRAM controller and the PEG controller in the north

bridge.

Possible values:

• Disabled — Disable the SERR DMI messaging mechanism.

• Enabled — Allows SERR messages to be generated.

MemoryInformation

Table 10. MemoryInformation

Attribute Name Description

DIMMASize

Displays the amount of main memory physically installed in the DIMM slot A.

Possible Values: Read-only

DIMMBSize

Displays the amount of main memory physically installed in the DIMM slot B.

Possible Values: Read-only

DIMMCSize

Displays the amount of main memory physically installed in the DIMM slot C.

Possible Values: Read-only