Reference Guide

Attribute Name Description
DockSupportOnBattery
Enabling DockSupportOnBattery allows you to use the docking station, when AC power is
absent, but only when the battery is preceding a certain charge percentage. The
percentage may change per battery and per platform. For example, the dock may only be
powered when the battery is at 60 percent charge or higher, and when the battery drops
below this level (without AC power) the dock loses power.
Possible values:
• Enabled
• Disabled
EmbNic1
Controls the state of on-board LAN controller 1.
Possible values:
• Disabled
• Enabled
• EnabledPxe
• OnWithImageServerBoot
• EnabledwithRPLBoot
• EnabledwithISCSIBoot
EmbNic2
Controls the state of on-board LAN controller 2.
Possible values:
• Disabled
• EnabledwithPXE
• Enabled
• EnabledwithImageServerBoot
• EnabledwithRPLBoot
• EnabledwithISCSIBoot
EmbSataRaid
Configures the operating mode of the integrated SATA hard drive controller.
Possible values:
• Disabled — The SATA controllers are hidden.
• Ata — SATA is configured for ATA mode.
• Ahci — SATA is configured for AHCI mode.
• Raid — SATA is configured to support RAID mode (Intel Rapid Restore Technology).
ForcePXEasFirstBootDevice
Enables or disables Preboot Execution Environment (PXE) as the first boot device for all
subsequent boots.
Possible values:
• Enabled
• Disabled
ForcePxeNextBoot
Enables or disables Force PXE on next boot in BIOS.
Possible values:
• Enabled — If enabled, when the BIOS boots next time, the first PXE-capable device is
inserted as the first device in the boot sequence. Enabling this value causes this
operation on the next boot only, and does not cause a change in the defined boot
sequence of the system. The BIOS chooses the first PXE-capable device as the onboard
33