Reference Guide

SupportAssistSystemResolution

Table 20.

Attribute Description

AutoOSRecoveryThreshold

Sets the threshold value for auto OS recovery.

Possible values: 0 to 3

Controls the automatic boot flow for SupportAssist System Resolution console and

for Dell OS Recovery Tool. The system boots to the SupportAssist System

Resolution console and for Dell OS Recovery Tool if;

• the primary operating system fails to boot consecutively

• the count of boot failure is greater than or equal to the value of the Auto OS

Recovery threshold setup option

• SupportAssist OS Recovery option is enabled

NOTE: If Auto OS Recovery threshold is set to 0, then all automatic boot

flow for SupportAssist System Resolution console and for Dell OS Recovery

Tool will be disabled.

BiosConnect

Enables or Disables BIOS Connect feature.

Possible values:

• Enabled

• Disabled

EnableSupportAssistOSRecovery

Enables or disables the boot flow for SupportAssist OS recovery tool in the event of

certain system errors.

Possible values:

• Enabled

• Disabled

SystemConfiguration

Table 21. SystemConfiguration

Attribute Name Description

CanBus

Enables or disables the Controller Area Network (CAN) Bus.

Possible values:

• Enabled

• Disabled

DisOsdBtn

Enables or disables the On-screen Display (OSD) buttons on an All-In-One system. When

disabled, pressing these buttons has no effect.

Possible values:

• Enabled

• Disabled