Reference Guide

Attribute Name Description

• Disabled — The system does not detect and report the Chassis Intrusion events to the system

display on boot-up.

• SilentEnable — The system detects, but does not report the Chassis Intrusion events to the

system display on boot-up.

ChassisIntrusionStatus

Displays the status of chassis intrusion.

NOTE: Except TripReset, all values are read-only.

Possible values:

• DoorOpen — Indicates that chassis door is open.

• Tripped — Indicates that the chassis door was opened since the last time the sensor-detection

logic was reset.

• DoorClosed — Indicates that chassis door is closed.

• TripReset — Resets the sensor-detection logic to detect the next closed-to-open transition on

the chassis door.

CpuXdSupport

Enables or disables the run disable mode of the processor. The operating system can use this feature

to hinder software that exploits buffer overflows.

Possible values:

• Enabled

• Disabled

GeneralPurposeEncryptio

Enables or disables general-purpose encryption.

Possible values:

• Enabled

• Disabled

HDDInfo

Displays the details of each HDD. The following information is displayed:

• HDDName — The name of the HDD.

• Present — Whether the HDD is physically present.

• PwdProtected — Whether a password exists for the HDD.

• PendingRestart — Whether a reboot is pending to set the password.

• AdminOnlyChange — Whether the changes to the password can be made only by an

administrator.

• SecureEraseSupported — Whether HDD Secure Erase is supported.

• SecureEraseEnabled — Whether HDD Secure Erase is enabled.

Possible values: Read-only

HDDPassword

Sets, changes, or clears the HDD password. Enter the HDD password, if set, when the system is

powered on.

NOTE: After setting the HDD password, restart the system.

Possible values: String containing minimum 1 and maximum 32 characters including whitespace.

HddProtection

Lets the user choose loading of HDD Protection OPROM.

IntlPlatformTrust

Enables or disables IntlPlatformTrust feature.