Reference Guide

Attribute Description
RecoveryTool
Enables or disables the Dell recovery tool.
Possible values:
• Enabled — Enables the Dell recovery tool.
• Disabled — Disables the Dell recovery tool.
ServiceOSClear
Deletes the service OS non-volatile region.
Possible values:
• Enabled — Deletes the service OS non-volatile region and changes the token
status to Disabled.
• Disabled — Does not delete the service OS non-volatile region.
UsbWakeS4En
Enables or disables the USB wake from s4 power state of the system.
Possible values:
• Enabled — Enables the USB wake from s4 power state of the system.
• Disabled — Disables the USB wake from s4 power state of the system.
ProcessorInformation
Table 16. ProcessorInformation
Attribute Name Description
64-BitTechnology
Specifies whether the installed processors support 64-bit extensions.
Possible values: Read-only
CoreCount
Displays the number of cores in each processor. By default, the maximum number of cores
per processor are enabled.
Possible values: Read-only
CurrentClockSpeed
Displays the current speed of the processor.
Possible values: Read-only
HTCapable
Specifies whether the system supports Hyper Threading (HT).
Possible values: Read-only
MaximumClockSpeed
Displays the maximum speed supported by the processor.
Possible values: Read-only
ProcessorID
Displays the processor ID that contains the processor-specific information that describes the
features of the processor.
Possible values: Read-only
ProcessorL2Cache
Displays the L2 cache size.
Possible values: Read-only
26