Reference Guide

Attribute Name Description

• LanWlan — Allows the system to be powered on by special LAN or wireless LAN signal.

• AddInCard — Allows the system to be powered on by NICs plugged into the special

power connector.

• Onboard — Allows the system to be powered on by Onboard NIC.

WlanAutoSense

Enables or disables the WLAN radio when the system is connected to a wired network. When

disconnected from the wired network, WLAN radio is re-enabled.

Possible values:

• Enabled

• Disabled

WwanAutoSense

Enables or disables the WWAN radio when the system is connected to a wired network. When

disconnected from the wired network, WWAN radio is re-enabled.

Possible values:

• Enabled

• Disabled

PreEnabled

Table 15. PreEnabled

Attribute Description

BiosConnectActivation

Configures the state of the available BiosConnect boot paths.

Possible values:

• Deactivate — BIOS setup options are not available and all BiosConnect boot paths

are disabled.

• FullActivation — BIOS Setup options are enabled and all BiosConnect boot paths

are enabled.

• LaunchpadActivationOnly — BIOS setup options are enabled and only launchpad

code path is enabled.

CpuRSA

Enables or disables the Reliability Availability Serviceability (RSA) support on CPUs.

Possible values:

• Enabled

• Disabled

DisGpuExtDisplay

Enables or disables the platform external displays.

Possible values:

• Enabled — Allows discrete Graphics Processing Unit (dGPU) to enable the

platform external displays such as HDMI, NB DP and Type-C, etc. with the purpose

of enabling discrete graphic features such as Eyefinity, Mosaic, 10bit DP displays,

etc..

NOTE: Embedded Display Port (eDP) will be enabled by Integrated

Graphics Processing Unit (iGPU).

• Disabled — The normal hybrid graphics mode is enabled.

NOTE: This feature is used in hybrid graphics mode only.