Reference Guide

Attribute Name Description

NOTE: This feature works only if the system is connected to AC power.

SleepMode

Determines which sleep mode to be used by the operating system.

NOTE: The BIOS can only support either Modern Standby sleep mode (connected or

disconnected), or S3 sleep mode.

Possible values:

• OSAutoSelection — Allows the operating system to select the appropriate sleep mode

automatically.

• ForceS3 — Forces the operating system to use the S3 sleep mode only.

SliceBattChargeCfg

Configures the battery slice charge mode. The battery slice is an external battery that docks

with the system docking connector. The battery slice houses its own battery charger.

Possible values:

• Standard

• Express

TypeCPower

Configures the maximum power for type-C connector.

Possible values:

• 7.5W

• 15W

UsbWake

Enables USB devices to wake the system from Standby.

NOTE: This feature is functional only when the AC power adapter is connected.

Possible values:

• Enabled

• Disabled

WakeOnAc

Controls the system's behavior when AC power is restored after AC power was lost.

Possible values:

• Disabled — System stays off after AC power is restored.

• Enabled — System powers on after AC power is restored.

WakeOnDock

Enables or disables waking the system when a docking connection is made.

Possible values:

• Enabled

• Disabled

WakeOnLan

Enables the system to turn on from the off state when triggered by a special LAN signal, or

from the hibernate state when triggered by a special wireless LAN signal.

Possible values:

• LanOnly — Allows the system to be powered on by special LAN signal.

• Disabled — Does not allow the system to power on when it receives a wakeup signal from

the LAN or wireless LAN.

• LanWithPxeBoot

• WlanOnly — Allows the system to be powered on by special WLAN signal.