Reference Guide

Attribute Name Description
Possible values:
• PromptWrnErr — System pauses for the user to respond when warnings or errors are
detected.
• ContWrn — System continues to boot when warnings are detected, but pauses for the
user to respond when errors are detected.
• ContWrnErr — System continues to boot when warnings or errors are detected.
NOTE: Errors deemed critical to the operation of the system hardware always
pause the system.
WyseP25Access
Enables or disables the WyseP25Access feature.
Possible values:
• Enabled — Allows remote access to BIOS setup through Dell Wyse P25, Dell Wyse P45,
or through any other compatible portal.
• Disabled — Restricts remote access to BIOS setup through Dell Wyse P25, Dell Wyse
P45, or through any other compatible portal.
CAUTION: If Dell Wyse P25 BIOS Access feature is disabled, it cannot be enabled
remotely through the Dell Wyse P25, Dell Wyse P45, or through any other
compatible portal. Disabling this feature prevents keyboard access to Diagnostics,
Safe Mode, Boot Options, and other Pre-OS functionalities.
NOTE: This feature is enabled by default.
PowerManagement
Table 14. PowerManagement
Attribute Name Description
AcPwrRcvry
Controls the system's behavior when AC power is restored after AC power has been lost.
Possible values:
• Off — System stays off after AC power is restored.
• On — System powers on after AC power is restored.
• Last — System returns to the previous state after AC power recovery.
AdvancedBatteryChargeConfigu
ration
Configures the days settings based on BeginningOfDay and workperiod. Advanced Battery
charge mode uses standard charging algorithm and other methods during working hours to
maximize battery health. During working hours, express charge is used to charge the batteries
faster. You can configure the days and the work period during which the battery has to be
charged. To enable advanced battery charging, provide the day, and set the following:
Possible values:
• BeginningOfDay — To configure the AdvanceBatteryCharge start time in 24 hours
format. The value of hour must be in the range 0–23 and minute must be 0, 15, 30, or 45.
• Workperiod — To configure the duration of charging.
AdvBatteryChargeCfg
Enables or disables the Advanced Battery Charge configuration. During working hours, with
the Advanced Battery Charge configuration, the batteries can be charged faster using
ExpressCharge.
Possible values:
• Enabled
• Disabled
18