Reference Guide

Attribute Name Description
• 5s — Delays for 5 seconds.
• 10s — Delays for 10 seconds.
Fastboot
Controls specific steps performed during boot to decrease boot time or increase boot
checks. This option can speed up the boot process by bypassing some compatibility steps.
Possible values:
• Minimal — Reduces boot time by skipping certain hardware and configuration
initialization during boot.
• Thorough — Performs complete hardware and configuration initialization during boot.
• Auto — Allows the BIOS to decide configuration initialization to be performed during
boot.
•
FnLock
This option controls the behavior of the dual function keys, when Fn key is pressed and
when it is not.
Possible values:
• Enabled — Fn+Esc key combination toggles the primary behavior of F1 to F12 keys
between their normal and secondary functions.
• Disabled — You cannot toggle the primary behavior of these keys.
FnLockMode
If Enabled, F1 to F12 keys behave as function keys holding Fn key is required to access their
secondary functions. Without holding Fn key, the dual function keys behave as normally
labeled.
Possible values:
• EnableSecondary
• DisableStandard
FullScreenLogo
Enables or disables the full screen logo that appears during BIOS POST.
Possible values:
• Enabled
• Disabled
Keypad
Activates the internal keyboard's embedded keypad either when Numlock LED is on or when
the Fn key is pressed.
NOTE: When Setup is running, this option has no effect, Setup works in the
EnabledByFnKey mode.
Possible values:
• EnabledByFnKey — The keypad is enabled only when you hold the Fn key.
• EnabledByNumLock — The keypad is enabled when, the Numlock LED is On and no
external keyboard is attached.
NumLock
Enables or disables the NumLock function when the system boots.
Possible values:
• Enabled
• Disabled
PntDevice
Defines how the system handles mouse and touchpad input.
16