Reference Guide

Attribute Name Description
PeakShiftBatteryThreshold
Sets the value of the Peak Shift battery threshold. The acceptable value
range is from 15 to 100 percent. When the Peak Shift battery threshold
level is reached, the system starts using AC power.
Possible values: Integers ranging from 15 to 100
PeakShiftDayConfiguratio
n
Configures the days settings based on StartTime, EndTime, and
ChargeStartTime. Using Peak Shift configuration, you can minimize the
consumption of AC power during the peak power usage period of the day.
You can set a start and end times for the Peak Shift period. During this
period, the system runs on battery if the battery charge is preceding the set
battery threshold value. After the Peak Shift period, the system runs on AC
power without charging the battery. The system functions normally using
AC power and recharging the battery after the specified ChargeStartTime.
Possible values:
• Enabled
• Disabled
AdvancedBatteryCharging
Mode
Enables or disables the Advanced Battery Charge configuration. During
working hours, with Advanced Battery Charge configuration, the batteries
can be charged faster using ExpressCharge.
Possible values:
• Enabled
• Disabled
AdvancedBatteryChargeC
onfiguration
Configures the days settings based on BeginningOfDay and workperiod.
Advanced Battery charge mode uses standard charging algorithm and
other methods during working hours to maximize battery health. During
working hours, express charge is used to charge the batteries faster. You
can configure the days and the work period during which the battery has
to be charged. To enable advanced battery charging, provide the day, and
set the following:
Possible values:
• BeginningOfDay — To configure the AdvanceBatteryCharge start time
in 24 hours format. The value of hour must be in the range 0–23 and
minute must be 0, 15, 30, or 45.
• Workperiod — To configure the duration of charging.
DeepSleepControl
Controls when Deep Sleep is enabled.
Possible values:
• Disabled
• Enabled in S5 only
• Enabled in S4 and S5
FanSpeedControl
Sets the speed of the fan to Auto, High, Medium, Low, Medium High, or
Medium Low. When set to Auto, the system run time automatically sets the
speed.
24