Reference Guide

Attribute Name Description

UEFINetworkStack

This option is disabled by default. If enabled, UEFI networking protocols

are installed/available, allowing pre-OS and early OS networking features

to use the enabled NICs. This option may be used without turning on

PXE.

Possible values:

• Enabled

• Disabled

ParallelPort

Determines how the parallel port on the docking station operates.

Possible values:

• Disabled — Port is disabled.

• AT — Port is configured for IBM AT compatibility.

• PS2 — Port is configured for IBM PS2 compatibility.

• ECP — Extended Capability Port protocol.

SerialPort1

Configures the first (or only) built-in serial port.

Possible values:

• Disabled

• COM1

• COM2

• COM3

• COM4

• Auto

SerialPort2

Configures the second (if available) built-in serial port.

Possible values:

• Disabled

• COM2

• COM4

• Auto

SATAOperation

Configures the operating mode of the integrated SATA hard drive

controller.

Possible values:

• Disabled — The SATA controllers are hidden.

• ATA — SATA is configured for ATA mode.

• AHCI — SATA is configured for AHCI mode.

• RAID On — SATA is configured to support RAID mode (Intel Rapid

Restore Technology).

SATA0

Enables or disables the first SATA drive controller.