Users Guide

● Feature Enablement
The system administrator can further choose from the following options, available in the left pane:
○ On—Turn on the feature, and apply the individual day and time settings to the system (default)
○ Off—Turn off the feature
○ Hide Feature—Remove the feature tab from the GUI
● Day of the week (Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday)
To disable a specific day, set all the hour and minute fields in that template to 0 (zero).
To configure Start Time for the day:
○ Set Hours: 0-23
○ Set Minutes: 0, 15, 30, 45
To configure End Time for the day:
○ Set Hours: 0-23
○ Set Minutes: 0, 15, 30, 45
Battery Information Group Policies
Two policies are available within this group:
● Battery Settings
● Order Battery Link
Peak Shift Group Policy Templates
In addition to the Feature Enablement template, the following group policy templates are available for Peak Shift:
● Day of the week (Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday)
To disable a specific day, set all the hour and minute fields in that template to 0 (zero). To configure Start Time for the day:
○ Set Hours: 0-23
○ Set Minutes: 0, 15, 30, 45
To configure End Time for the day:
○ Set Hours: 0-23
○ Set Minutes: 0, 15, 30, 45
● Restore AC Power Threshold
Typical uses for these settings are:
○ Set the minimum and maximum threshold limits and leave the Threshold value field blank. This sets a limit for the range,
but allows the threshold value to be modified in the user interface.
OR:
○ Set Threshold value and leave the Minimum threshold limit and Maximum threshold limit blank. This value will be
locked and cannot be modified in the user interface.
To set a range for the threshold limits, enter the Minimum (1 - 100) and Maximum (Minimum - 100) values. If
a minimum or maximum limit is not within the client system's minimum or maximum capabilities, the client system's
minimum or maximum limit will be used.
NOTE: The system will use default values if invalid values are set.
18 Administration