Release Notes

NOTE: RearUsb3Ports and FrontUsbPortCollection are deprecated as these features are not applicable, but same
attributes IDs can be used for configuring WakeOnLan2.
Issue: Additional attributes that get enumerated by DCM under DCM_BIOSEnumeration.
Description: Additional SMBIOS attributes that are available are displayed in DCM. These additional attributes are displayed in
the DCIM_BIOSEnumeration class and the set operation does not work as the attributes are not available in BIOS.
Following are the attributes:
● Force PXE on next boot on
● Force PXE on next boot off
● Watchdog timer on
● Watchdog timer off
Issue: Some attributes does not work as expected which are enumerated by DCM under DCM_BIOSEnumeration.
Description: Additional SMBIOS attributes that are available are displayed in DCM. These additional attributes are displayed in
the DCIM_BIOSEnumeration class but the set operation does not work on these attributes. Following are the attributes:
Following are the attributes:
● LCD brightness
● Keyboard illumination
● Modern standby control
● Energy star logo
Issue: dsm_sa_datamgr32 service stops responding while installing chipset driver
Description: This issue occurs only when Dell Command | Monitor is installed on some platforms before installing the chipset
driver.
Issue: SecureEraseSupported and SecureEraseEnabled parameters in HDDInfo displays ‘No’ even if enabled from BIOS setup
screen.
This issue will be addressed in the upcoming BIOS versions.
Issue: dsm_sa_datamgr32 service stops responding while installing chipset driver.
Issue: Class DCIM_PhysicalDiskView enumerates only IDE disk drives for Intel controller.
Issue: The value of Link technology property in DCIM_EthernetPort class appears empty.
Description: If the value of any attributes is not in English, then that attributes field may appear blank. For example,
DCIM_EthernetPort_LinkTechnology. Dell Command | Monitor is not localized and is an English language application; however,
Dell Command | Monitor can be installed on other OS language versions such as French, German, Spanish, Japanese, Korean,
Simplified Chinese, and Traditional Chinese of supported Windows operating systems.
Issue: Dell Command | Monitor allows enabling Secure Boot when Legacy Option ROM is enabled and boot mode is UEFI;
however, there is no negative impact due to this on the BIOS. This issue will be addressed in the upcoming BIOS versions.
Issue: If the fan is not working as indicated by Health Status and OperationalStatus attributes, then the attributes Current
Status will be blank.
Issue: The NonCritical threshold levels for voltage and current cannot be negative values.
Issue: Setting the NonCritical threshold levels for fans is not supported. For the attributes SettableThreshold the NonCritical
value can be set to Settable.
Issue: For temperature probe, the Upper Critical Threshold level should be greater than 0.
Issue: Digital signatures are missing for some third party files.
Issue: Setting Lower NonCritical Threshold attributes may not be supported although SupportedThreshold attributes shows
that it is supported.
Issue: If the values of Upper NonCritical Threshold for NumericSensor class are close to reading or status values, then an event
might be generated although the same might not be shown in the class attributes.
Issue: Lower Threshold alerts are not generated; however, they can be monitored using the Current State attributes in
NumericSensor class.
Issue: Degraded status and alert for physical disk is not supported with LSI controllers.
Issue: In LogEntry the element name for alerts is displayed as Alert Log Entry <Alert ID>.
6