Dell Command | Monitor Version 10.2.1 Release Notes December 2012 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2008 -2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: .................................................................................................................................... 4 Release Type and Definition..............................................................................................................................................4 Compatibility.........................................................................................................................................................................
1 Topics: • • • • • • • • • • Release Type and Definition Compatibility What's new in this release for Dell Command | Monitor 10.2.1 Importance Important Notes Known Issues Limitations Installation Instructions Resources and support Contacting Dell Release Type and Definition The Dell Command | Monitor enables remote management application programs to access the client's system information, monitor the status, change the state, and shut it down remotely.
Supported Windows operating systems ● Microsoft 10 Red Stone 1, Red Stone 2, Red Stone 3, Red Stone 5, Red Stone 6. ● Microsoft Windows 10, Microsoft Windows 10 Pro, and Windows 10 IoT Enterprise LTSB 2016 (64-bit) editions. NOTE: Microsoft Windows 10 IoT Enterprise LTSB 2016 is supported only on Dell IoT Gateway systems, and for Dell Embedded PCs. ● Microsoft Windows 8.1, Microsoft Windows 8.1 Professional, and Enterprise (32-bit and 64-bit) editions.
NOTE: RearUsb3Ports and FrontUsbPortCollection are deprecated as these features are not applicable, but same attributes IDs can be used for configuring WakeOnLan2. Issue: Additional attributes that get enumerated by DCM under DCM_BIOSEnumeration. Description: Additional SMBIOS attributes that are available are displayed in DCM. These additional attributes are displayed in the DCIM_BIOSEnumeration class and the set operation does not work as the attributes are not available in BIOS.
Issue: While stopping the data manager service, an error message might be displayed saying the process cannot be stopped. But the service will be stopped. Issue: For LSI controllers, status or event may not be generated when the Battery Backup Unit (BBU) is degraded. Resolution: The BBU degraded status can be viewed in the application log for event (Id #161 of category type: Warning) generated by source MR_MONITOR.
NOTE: For systems running Windows 7 Service Pack 1, KB3033929 (SHA-2 code signing support for windows 7) and KB2533623 (Insecure library loading fix) must be installed prior to installing Dell Command | Monitor. Other Requirements ● Active Dell EDM subscription. Go to http://www.cloudclientmanager.com and click Trial and Licensing for more details on subscription. ● EDM agent must be installed in order to discover the features offered by Dell Command | Monitor.
