Reference Guide

Table 26. Fan (continued)
Property Description
NOTE: The Name property of ManagedSystemElement is also defined as a user-
friendly name. But, it is often subclassed to be a Key. It is not reasonable that
the same property can convey both identity and a user-friendly name, without
inconsistencies. Where Name exists and is not a Key (such as for instances of
LogicalDevice), the same information can be present in both the Name and
ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration
for the Enabled State of an element.
Possible values are:
● 2 = Enabled
● 3 = Disabled
● 5 = Not Applicable
● 6 = Enabled but Offline
● 7 = No Default
● 9 = Quiesce
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states of an element.
It can also indicate the transitions between these requested states. For example,
shutting down (value = 4) and starting (value = 10) are transient states between
enabled and disabled.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Enabled — Indicates that the element is or could be executing commands,
will process any queued commands, and queues new requests.
● 3 = Disabled — Indicates that the element will not execute commands and will
drop any new requests.
● 4 = Shutting Down — Indicates that the element is in the process of going to a
Disabled state.
● 5 = Not Applicable — Indicates the element does not support being enabled or
disabled.
● 6 = Enabled but Offline — Indicates that the element may be completing
commands, and will drop any new requests.
● 7 = In Test — Indicates that the element is in a test state.
● 8 = Deferred — Indicates that the element may be completing commands, but
will queue any new requests.
● 9 = Quiesce - Indicates that the element is enabled but in a restricted mode.
● 10 = Starting - Indicates that the element is in the process of going to an Enabled
state. New requests are queued.
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
ErrorCleared
The use of this method is deprecated. Deprecated description: ErrorCleared is a
Boolean property that indicates that the error reported in LastErrorCode is now
cleared.
ErrorDescription
The use of this method is deprecated. Deprecated description: ErrorDescription is a
free-form string that supplies more information about the error recorded in
LastErrorCode and information on any corrective actions that can be taken.
98 Dell Command | Monitor 10.3 classes and properties