Reference Guide

Table 24. PCIDevice (continued)
Property Description
on whether its Availability (or AdditionalAvailability) indicates
that it is Running/Full Power (value = 3) or Off line (value
= 8). In an enabled but offline mode, a Device may be
performing out-of-band requests, such as running Diagnostics.
If StatusInfo is Disabled (value = 4), a Device can only be
enabled or powered off. In a personal computer environment,
disabled means that the driver of the device is not available
in the stack. In other environments, a Device can be disabled
by removing its configuration file. A disabled device is
physically present in a System and consuming resources, but it
cannot be communicated with until a driver is loaded, a
configuration file is loaded, or some other enabling activity
has occurred.
Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = Enabled
● 4 = Disabled
● 5 = Not Applicable
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is
transitioning.
Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change — Indicates that no transition is in
progress.
●
6 = Offline
● 7 = Test
● 8 = Defer
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable — Indicates the implementation does
not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the
element is in the process of transitioning.
DCIM_DisplayController
Table 25. DisplayController
Property Description
CapabilityDescriptions
An array of free-form strings providing more detailed explanations for any of the
video Accelerator features indicated in the Capabilities array. Note, each entry of
this array is related to the entry in the Capabilities array that is located at the same
index.
94 Dell Command | Monitor 10.3 classes and properties