Reference Guide

Table 23. Memory (continued)
Property Description
portion of the continuum for additional HealthStates in the
future.
● 5 = OK — The element is fully functional and is operating
within normal operational parameters and without error.
● 10 = Degraded/Warning — The element is in working
order and all functionality is provided. However, the
element is not working to the best of its abilities. For
example, the element may not be operating at optimal
performance or it may be reporting recoverable errors.
● 15 = Minor failure — All functionality is available but some
may be degraded.
● 20 = Major failure — The element is failing. It is possible
that some or all of the functionality of this component is
degraded or not working.
● 25 = Critical failure — The element is non-functional and
recovery may not be possible.
● 30 = Non-recoverable error — The element has
completely failed, and recovery is not possible. All
functionality provided by this element has been lost.
● .. = DMTF Reserved
NumberOfBlocks
Total number of logically contiguous blocks, of size Block Size,
which form this Extent. The total size of the Extent can be
calculated by multiplying BlockSize by NumberOfBlocks. If the
BlockSize is 1, this property is the total size of the Extent.
OperationalStatus
Indicates the current statuses of the element. Various
operational statuses are defined. Many of the enumeration's
values are self-explanatory.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = OK
● 3 = Degraded
● 4 = Stressed — Indicates that the element is functioning,
but needs attention. Examples of Stressed states are
overload, overheated, and so on.
● 5 = Predictive Failure — Indicates that an element is
functioning nominally but predicting a failure in the near
future.
● 6 = Error
● 7 = Non-Recoverable Error
● 8 = Starting
● 9 = Stopping
● 10 = Stopped
● 11 = In Service — Describes an element being configured,
maintained, cleaned, or otherwise administered.
● 12 = No Contact — Indicates that the monitoring system
has knowledge of this element, but has never been able to
establish communications with it.
● 13 = Lost Communication — Indicates that the
ManagedSystem Element is known to exist and has been
contacted successfully in the past, but is currently
unreachable.
● 14 = Aborted
● 15 = Dormant — Indicates that the element is inactive or
quiesced.
88
Dell Command | Monitor 10.3 classes and properties