Reference Guide

Table Of Contents
Table 7. DesktopMonitor (continued)
Property Description
SystemCreationClassName
The creation class name of the scoping system.
SystemName
The system name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is
transitioning.
Possible values are:
0 = Unknown
2 = Enabled
3 = Disabled
4 = Shut Down
5 = No Change Indicates that no transition is in
progress.
6 = Offline
7 = Test
8 = Defer
9 = Quiesce
10 = Reboot
11 = Reset
12 = Not Applicable Indicates that the implementation
does not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the
element is in the process of transitioning.
VeryLowPowerSupported
This property represents if the video output device can go
into a low power mode.
Possible values are:
0 = Unknown
2 = Supported
3 = Not Supported
.. = DMTF Reserved
32768..65535 = Vendor Reserved
DCIM_DHCPProtocolEndpoint
Table 8. DHCPProtocolEndpoint
Property Description
ClientState
ClientState represents the current state of the DHCP client. See RFC1541 for
more information on the meaning of each state.
Possible values are:
0 = Unknown
1 = DMTF Reserved
2 = Init
3 = Selecting
4 = Requesting
5 = Rebinding
6 = Init-Reboot
7 = Rebooting
8 = Bound
9..32767 = DMTF Reserved
38 Dell Command | Monitor 10.3 classes and properties