Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.3 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Deny
Permit
Wireless Switch Wireless LAN Control
Enables or Disables wireless switch wireless LAN control.
This switch has no effect on the state of the wireless LAN
radio for systems with a physical wireless on/off switch.
Possible values are:
Disabled
Enabled
Windows, Linux
Wireless Switch WLAN-WIGIG
Control
Enables or Disables the effect of physical wireless switch
on wireless LAN and WiGig radio.
Possible values are:
Disabled The wireless physical switch does not affect
the wireless LAN and WiGig radios.
Enabled If the wireless physical switch is on, turns
the wireless LAN on and WiGig radio on. If the wireless
switch is off, turns the wireless LAN on and WiGig radio
off.
Windows, Linux
Wireless UWB
Enabled/Disabled UWB card.
Possible values are:
Disabled
Enabled
Windows
WLAN Region Code
Sets the WLAN code for specific region.
Possible values are:
0 = Rest of the World Sets the WLAN region code
for the rest of the world. This option is selected by
default.
1 = North America (FCC) Sets the WLAN region
code for Canada, and the United States.
2 = Europe Sets the WLAN region code for Australia,
Belgium, Czech Republic, Denmark, Finland, France,
Germany, Ireland, Italy, Luxembourg, Netherlands,
Norway, Poland, Portugal, Slovakia, Spain, Sweden,
Switzerland, Turkey, and United Kingdom.
3 = Japan Sets the WLAN region code for Japan
only.
4 = Australia Sets the WLAN region code for
Australia, New Zealand, Saudi Arabia, South Africa, UAE,
and Vietnam.
5 = China South Asia Sets the WLAN region code for
China, and India.
6 = Taiwan Sets the WLAN region code for
Colombia, Peru, and Taiwan.
7 = Indonesia Sets the WLAN region code for
Indonesia only.
Windows, Linux
WWAN Radio
Configures the WWAN radio.
Possible values are:
Disabled
WLAN on
Windows, Linux
BIOS settings supported in Dell Command | Monitor 10.3 319