Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.3 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
DisabledNo telemetry
BasicFlash and diagnostics only
EnhancedFlash, diagnostics, and boot event
FullAll telemetry guidelines
Tertiary IDE Channel, Master Device
Enables or Disables tertiary Parallel ATA master channel.
Possible values are:
Off
Auto
Windows
Tertiary IDE Channel, Slave Device
Enables or Disables tertiary Parallel ATA master channel.
Possible values are:
Off
Auto
Windows
Thunderbolt
Enables or Disables the thunderbolt controller in the
system.
Possible values are:
Disabled
Enabled
Windows, Linux
Thunderbolt Boot Support
Enables or Disables booting from the Thunderbolt device.
Possible values are:
Disabled
Enabled
Windows, Linux
Thunderbolt Pre Boot Module
Enables or Disables OROMs and pre-boot UEFI drivers
provided by Thunderbolt devices or PCIe devices.
Possible values are:
Disabled
Enabled
Windows, Linux
Thunderbolt Security Level
Configures the thunderbolt security level.
Possible values are:
No Security Disables the thunderbolt security.
User Authorization Allows minimum user notification.
Connection manager requests connection approval from
the host software, based on the unique ID of the
connecting device, auto approval might or might not be
given.
Secure Connect Allows one-time saved key device.
Connection manager requests connection approval from
the host software; approval is given only if the host
challenge to device is acceptable.
Display Port Only Allows to connect only display port.
Windows, Linux
Touch Screen
Enables or Disables the touchscreen of the device.
Possible values are:
Disabled
Enabled
Windows, Linux
BIOS settings supported in Dell Command | Monitor 10.3 309