Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.3 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
SFP
Enables or Disables Small Formfactor Pluggable (SFP)
device.
Possible values are:
Disabled Disables the SFP device.
Enabled Enables the SFP device.
Enabled With PXE Enables the SFP device with PXE
support.
NOTE: SFP device is listed as boot device only if this
BIOS setting is Enabled with PXE.
Windows, Linux
SFP Wake on LAN
Possible values:
SFP - Allows the system to wake-up by special SFP
signals.
LAN or PXE - Allows the system to wake-up either by
LAN, or by SFP signals.
SFP PXE - Allows the system to wake-up by SFP
singnals, and immediately boot to PXE.
Windows, Linux
Side USB Ports
Enables or Disables all the side ports.
Possible values are:
Disabled
Enabled
Windows, Linux
Sign of Life Indication
During post, system acknowledges that the power button
has been pressed in a manner that the user can either hear
or feel.
Possible values are:
Disabled
Enabled
Windows, Linux
Enable Sign of Life Customized logo
Indication
This option indicates that, during POST the power button
has been pressed by displaying the customized logo.
Possible values are:
Disabled
Enabled
Windows, Linux
Signed Firmware Update
Enforces the verification of digital signatures in the BIOS
update payload before updating the BIOS. Once Enabled,
the system BIOS cannot be updated to any revision that
does not contain a valid digital signature.
Possible values are:
Disabled
Enabled
Windows, Linux
SmartCard Reader
Enables or Disables the Smart Card Reader.
Possible values are:
Off
Enabled
Windows
Slice Battery Custom Charge Limit
Customs the charging limit.
Possible values are: 50, 100, 5
Windows
304 BIOS settings supported in Dell Command | Monitor 10.3