Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.3 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Disabled
Enabled
SATA DIPM
This property will allow users to Disabled or Enabled the
feature that allows SATA HDDs to initiate link power
management transitions.
Possible values are:
Disabled
Enabled
Windows
Secondary IDE Channel, Master
Device
Enables or Disables secondary Parallel ATA master channel.
Possible values are:
Off
Auto
Windows
Secondary IDE Channel, Slave Device
Enables or Disables secondary Parallel ATA slave channel.
Possible values are:
Off
Auto
Windows
Selective USB
Enabled Selective USB feature to Disabled all USB ports,
except for the 2 Selective USB ports. This option will allow
only keyboard/mouse connected to the Selective USB
ports for the boot process to continue.
Disabled Selective USB feature to resume normal USB
status and normal boot procedure.
Possible values are:
Disabled
Enabled
Windows
SATA Port 0
Enables or Disables Serial ATA channel 1.
Possible values are:
Off
Auto
Windows, Linux
SATA Port 1
Enables or Disables Serial ATA channel 2.
Possible values are:
Off
Auto
Windows, Linux
SATA Port 2
Enables or Disables Serial ATA channel 3.
Possible values are:
Off
Auto
Windows, Linux
SATA Port 3
Enables or Disables Serial ATA channel 4.
Possible values are:
Off
Auto
Windows, Linux
SATA Port 4
Enables or Disables Serial ATA channel 5.
Windows, Linux
300 BIOS settings supported in Dell Command | Monitor 10.3