Reference Guide

Table 150. BIOS settings supported in Dell Command | Monitor 10.3 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
● 0 — 23 — Start Hour
● 0 — 59 — Start Minute
● 0 — 23 — End Hour
● 0 — 59 — End Minute
● 0 — 23 — Charge Start Hour
● 0 — 59 — Charge Start Min
BIOS setting names for Set operation:
● Peak Shift Fri StartHour
● Peak Shift Fri StartMin
● Peak Shift Fri EndHour
● Peak Shift Fri EndMin
● Peak Shift Fri ChargeStartHour
● Peak Shift Fri ChargeStartMin
Peak Shift Sat
Configures the power usage configuration for Saturday.
Possible values are:
● 0 — 23 — Start Hour
● 0 — 59 — Start Minute
● 0 — 23 — End Hour
● 0 — 59 — End Minute
● 0 — 23 — Charge Start Hour
● 0 — 59 — Charge Start Min
BIOS setting names for Set operation:
● Peak Shift Sat StartHour
● Peak Shift Sat StartMin
● Peak Shift Sat EndHour
● Peak Shift Sat EndMin
● Peak Shift Sat ChargeStartHour
● Peak Shift Sat ChargeStartMin
Windows
Peak Shift Battery Threshold
If Battery stays above the threshold system will run from
battery even if AC is attached during the times as
configured in Start/End/Charge Start time.
Possible value is based on user input.
● >= 15% Possible Value <= 100%.
BIOS setting name for Set operation:
● Peak Shift Battery Threshold
Windows, Linux
Pointing Device
This property defines whether the built-in pointing device
port is Enabled or Disabled.
Possible values are:
● External serial
● External PS2
● SW TPAD
Windows, Linux
post Help Desk Key
Enables or Disables post MEBx Key.
Possible values are:
● On
● Off
Windows
294 BIOS settings supported in Dell Command | Monitor 10.3