Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.3 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
PCI Slots
Enables or Disables the PC Card.
Possible values are:
Disabled
Enabled
Windows, Linux
PCIE0
Enables or Disables the PCIE1 Card.
Possible values are: 1,2
Disabled
Enabled
Windows, Linux
PCIE1
Enables or Disables the PCIE0 Card.
Possible values are: 1,2
Disabled
Enabled
Windows, Linux
PCIE0_CPU1
Enables or Disables the PCIE0_CPU1 Card.
Possible values are: 1,2
Disabled
Enabled
Windows, Linux
PCIE1_CPU1
Enables or Disables the PCIE1_CPU1 Card.
Possible values are: 1,2
Disabled
Enabled
Windows, Linux
PCMCIA
Enables or Disables the PCMCIA device slot.
Possible values are:
Disabled
Enabled
Windows, Linux
Pen Missing Indication
Enables or Disables the Missing Pen Indication.
Possible values are:
Disabled
Enabled
Windows
Pen Resume On
Enables or Disables the Resume On Pen setting.
Possible values are:
Disabled
Enabled
Windows
Peak Shift
Peak Shift can be used to minimize AC consumption during
peak power times of day. For each weekday listed, set a
start and end time to run in Peak Shift mode. During these
times the system will run from the battery even if the AC is
attached as long as the battery stays above the threshold
specified in the Battery threshold field. After the end time
specified the system will run from AC if attached but will
not charge the battery. The system will again function
normally using AC and recharging the battery after the
Charge Start time is specified.
Windows, Linux
BIOS settings supported in Dell Command | Monitor 10.3 291