Reference Guide

Table 150. BIOS settings supported in Dell Command | Monitor 10.3 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
● Enabled — System clears fault tolerant memory log
during the next boot.
● Disabled — Fault Tolerant Memory Log Clear option will
be Disabled, and no action will be taken during the next
boot.
NOTE: Fault Tolerant Memory Log Clear option will be
reset to Disabled state after log gets cleared.
Fn Lock
Controls the behavior of the dual-function keys (<F1> —
<F12>), when <Fn> key is pressed.
Possible values are:
● Disabled — If Disabled, holding the <Fn> key Enables
the secondary functions associated with the particular
key.
● Enabled — If Enabled, holding the <Fn> key Enables the
labeled functions of the keys (<F1> — <F12>).
Windows, Linux
Fn Lock Mode
Controls the behavior of the dual-function keys (<F1> —
<F12>), when <Fn> key is pressed and when it is not.
Possible values are:
● Disabled — Holding <Fn> key Enables the secondary
functions associated with the particular key
● Enabled — Without holding <Fn> key, the dual-function
keys behave as labeled.
Windows, Linux
Force PXE on Next Boot
Enables or Disables the Force PXE on next boot in BIOS.
Possible values are:
● Disabled
● Enabled
Windows, Linux
Front Bezel LED Intensity Control Controls the light intensity of the system's front bezel LED.
Possible values are:
● Disabled
● Low
● Medium
● Full
Windows, Linux
Front Fan
Possible values are:
● Disabled - When disabled, thermal solution of the
system utilizes only the fan from the back panel.
● Enabled - When enabled, the front fan utilizes the
thermal solution of the system.
Windows, Linux
Front Panel USB Ports
Enables or Disables the USB ports on the front of the
chassis.
Possible values are:
● Disabled
● Enabled
Windows, Linux
Front Power Button
Enables or Disables the Front Power Button.
Possible values are:
● Disabled
Windows, Linux
274 BIOS settings supported in Dell Command | Monitor 10.3