Reference Guide

Table Of Contents
Table 150. BIOS settings supported in Dell Command | Monitor 10.3 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
CPU Virtualization Technology
Enables or Disables CPU Virtualization.
Possible values are:
Disabled
Enabled
Windows
Deep Sleep Control Configures the system power mode when the system is in
S4 and S5 state. If set to S5only, the system moves to the
lowest-Power Off mode only in S5 state. If set to S4 and
S5 state, the system moves to the lowest-Power Off mode
in both S4 and S5 states. When the system is in low-power
mode, it turns off most of the power-consuming circuitry,
to meet the 1 W power limit. It Disables PME, USB power,
etc.
Possible values are:
S5 only
S4 and S5
Disabled
Windows, Linux
Dell Reliable Memory Technology Configures the system to detect and correct the software
errors in a block of RAM. When Enabled, the system
detects and corrects the software errors.
Possible values are:
Disabled
Enabled
Windows, Linux
Dell Wyse P25 Bios Access Turns on or off the access to the BIOS setup through Dell
Wyse P25 PCoIP client.
Possible values are:
On
Off
Windows
dGPU External Display
Enables or Disables discrete Graphics Procession (GPU)
Unit external display.
Possible values are:
Disabled
Enabled
Windows, Linux
Diskette
This property defines whether the built-in Floppy controller
is Enabled, auto or read-only.
Possible values are:
Disabled
Auto
Read Only
USB Internal
Windows
Disable Onboard LEDs
Onboard LEDs stop functioning when stealth mode is
enabled.
Possible values are:
Disabled
Enabled
Windows
BIOS settings supported in Dell Command | Monitor 10.3 267