Reference Guide

Table 150. BIOS settings supported in Dell Command | Monitor 10.3 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
● 1 — ADC Input — Sets the channel mode as Analog-to-
Digital Converter (ADC) input.
● 2 — DAC Output — Sets the channel mode as Digital-
to-Analog Converter (DAC) output.
● 3 — DAC and ADC — Sets the channel mode as DAC
output, but can be monitored through ADC input.
● 8 — GPIO — Sets the channel mode as General
Purpose Input or Output.
Analog Digital Interface Mode
Channel 5
Sets the defined Analog/Digital Interface mode for channel
5.
Possible values are:
● 0 — Unused — Channel is unused.
● 1 — ADC Input — Sets the channel mode as Analog-to-
Digital Converter (ADC) input.
● 2 — DAC Output — Sets the channel mode as Digital-
to-Analog Converter (DAC) output.
● 3 — DAC and ADC — Sets the channel mode as DAC
output, but can be monitored through ADC input.
● 8 — GPIO — Sets the channel mode as General
Purpose Input or Output.
Windows, Linux
Analog Digital Interface Mode
Channel 6
Sets the defined Analog/Digital Interface mode for channel
6.
Possible values are:
● 0 — Unused — Channel is unused.
● 1 — ADC Input — Sets the channel mode as Analog-to-
Digital Converter (ADC) input.
● 2 — DAC Output — Sets the channel mode as Digital-
to-Analog Converter (DAC) output.
● 3 — DAC and ADC — Sets the channel mode as DAC
output, but can be monitored through ADC input.
● 8 — GPIO — Sets the channel mode as General
Purpose Input or Output.
Windows, Linux
Analog Digital Interface Mode
Channel 7
Sets the defined Analog/Digital Interface mode for channel
7.
Possible values are:
● 0 — Unused — Channel is unused.
● 1 — ADC Input — Sets the channel mode as Analog-to-
Digital Converter (ADC) input.
● 2 — DAC Output — Sets the channel mode as Digital-
to-Analog Converter (DAC) output.
● 3 — DAC and ADC — Sets the channel mode as DAC
output, but can be monitored through ADC input.
● 8 — GPIO — Sets the channel mode as General
Purpose Input or Output.
Windows, Linux
Analog Digital Interface Mode
Channel 8
Sets the defined Analog/Digital Interface mode for channel
8.
Possible values are:
● 0 — Unused — Channel is unused.
Windows, Linux
BIOS settings supported in Dell Command | Monitor 10.3 259