Reference Guide

Table 67. AlertIndicationSettingData (continued)
Property Description
● 0 = Unknown
● 1 = Other
● 2 = Adapter/Card Error
● 3 = Application Subsystem Failure
● 4 = Bandwidth Reduced
● 5 = Connection Establishment Error
● 6 = Communications Protocol Error
● 7 = Communications Subsystem Failure
● 8 = Configuration/Customization Error
● 9 = Congestion
● 10 = Corrupt Data
● 11 = CPU Cycles Limit Exceeded
● 12 = Dataset/Modem Error
● 13 = Degraded Signal
● 14 = DTE-DCE Interface Error
● 15 = Enclosure Door Open
● 16 = Equipment Malfunction
● 17 = Excessive Vibration
● 18 = File Format Error
● 19 = Fire Detected
● 20 = Flood Detected
● 21 = Framing Error
● 22 = HVAC Problem
● 23 = Humidity Unacceptable
● 24 = I/O Device Error
● 25 = Input Device Error
● 26 = LAN Error
● 27 = Non-Toxic Leak Detected
● 28 = Local Node Transmission Error
● 29 = Loss of Frame
● 30 = Loss of Signal
● 31 = Material Supply Exhausted
● 32 = Multiplexer Problem
● 33 = Out of Memory
● 34 = Output Device Error
● 35 = Performance Degraded
● 36 = Power Problem
● 37 = Pressure Unacceptable
● 38 = Processor Problem (Internal Machine Error)
● 39 = Pump Failure
● 40 = Queue Size Exceeded
●
41 = Receive Failure
● 42 = Receiver Failure
● 43 = Remote Node Transmission Error
● 44 = Resource at or Nearing Capacity
● 45 = Response Time Excessive
● 46 = Retransmission Rate Excessive
● 47 = Software Error
● 48 = Software Program Abnormally Terminated
● 49 = Software Program Error (Incorrect Results)
● 50 = Storage Capacity Problem
● 51 = Temperature Unacceptable
● 52 = Threshold Crossed
Dell Command | Monitor 10.3 classes and properties
205