Reference Guide

Table 56. PowerAllocationSettingData (continued)
Property Description
● 4 = MaxAsConfigured — Indicates that the instance provides information about
the maximum power that may be allocated to or consumed by the
ManagedSystemElement as currently configured while powered on. The actual
power consumed may be less.
● 5 = MaxIfAllHotPlug — Indicates that the instance provides information about
the maximum power allocated or consumed by the ManagedSystemElement if all
components that could be added to the ManagedSystemElement without
requiring a power cycle of the ManagedSystemElement were added to the
ManagedSystemElement.
● 6 = MaxIfAllColdPlug — Indicates that the instance provides information about
the maximum power allocated or consumed by the ManagedSystemElement if all
components that could be added to the ManagedSystemElement, including those
that require a power cycle of the ManagedSystemElement, were added to the
ManagedSystemElement.
● 7 = Allocated — Indicates that the instance provides information about the
current power allocated to the ManagedSystemElement.
● 8 = MinWithoutDegradation — Indicates that the instance provides information
about the minimum power allocated or consumed by the ManagedSystemElement
without causing performance degradation.
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
ResourceType
The type of resource this allocation setting represents.
Possible values are:
● 1 = Other
● 2 = Computer System
● 3 = Processor
● 4 = Memory
● 5 = IDE Controller
● 6 = Parallel SCSI HBA
● 7 = FC HBA
●
8 = iSCSI HBA
● 9 = IB HCA
● 10 = Ethernet Adapter
● 11 = Other Network Adapter
● 12 = I/O Slot
● 13 = I/O Device
● 14 = Floppy Drive
● 15 = CD Drive
● 16 = DVD drive
● 17 = Disk Drive
● 18 = Tape Drive
● 19 = Storage Extent
● 20 = Other storage device
● 21 = Serial port
● 22 = Parallel port
● 23 = USB Controller
● 24 = Graphics controller
● 25 = IEEE 1394 Controller
● 26 = Partitionable Unit
● 27 = Base Partitionable Unit
● 28 = Power
● 29 = Cooling Capacity
● 30 = Ethernet Switch Port
● 31 = Logical Disk
Dell Command | Monitor 10.3 classes and properties
193