Reference Guide

Table 54. BootConfigSetting (continued)
Property Description
assure that the resulting InstanceID is not reused across any InstanceIDs produced
by this or other providers for the NameSpace of this instance. For DMTF-defined
instances, the preferred algorithm must be used with the <OrgID> set to CIM.
ChangeBootOrder (Method)
This method is called to change the boot order within a boot configuration. An
ordered array of BootSourceSetting instances is passed to this method. Each
BootSourceSetting instance MUST already be associated with this
BootConfigSetting instance via an instance of OrderedComponent. If not, the
implementation MUST return a value of Invalid Parameter. Upon execution of this
method, the value of the AssignedSequence property on each instance of
OrderedComponent will be updated such that the values are monotonically
increasing in correlation with the position of the referenced BootSourceSetting
instance in the source input parameter. That is, the first position in the array will
have the lowest value for AssignedSequence. The second position will have the
second lowest value, and so on. For BootSourceSetting instances which are
associated with the BootConfigSetting instance via OrderedComponent and not
present in the input array, the AssignedSequence property on the
OrderedComponent association will be assigned a value of 0.
DCIM_IPAssignmentSettingData
Table 55. IPAssignmentSettingData
Property Description
AddressOrigin
AddressOrigin identifies the method by which the IP Address, Subnet Mask, and
Gateway were assigned to the IPProtocolEndpoint.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Not Applicable — Indicates that the application of the
IPAssignmentSettingData instance does not affect these properties.
● 3 = Static — Indicates that values for the properties are contained in the
IPAssignmentSettingData instance.
● 4 = DHCP — Indicates that the values will be assigned via DHCP.
● 5 = BOOTP — Indicates that the values will be assigned via BOOTP.
● 6..32767 = DMTF Reserved
● 32768.. = Vendor Reserved
ElementName
The user-friendly name for this instance of SettingData. In addition, the user-friendly
name can be used as an index property for a search or query.
NOTE: The name does not have to be unique within a namespace.
InstanceID
Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely
identifies an instance of this class. To ensure uniqueness within the NameSpace, the
value of InstanceID should be constructed using the following preferred algorithm:
<OrgID> : <LocalID>
Where <OrgID> and <LocalID> are separated by a colon (:), and where <OrgID> must
include a copyrighted, trademarked, or otherwise unique name that is owned by the
business entity that is creating or defining the InstanceID or that is a registered ID
assigned to the business entity by a recognized global authority. (This requirement is
similar to the <Schema Name>_<Class Name> structure of Schema class names.) In
addition, to ensure uniqueness, <OrgID> must not contain a colon (:). When using this
algorithm, the first colon to appear in InstanceID must appear between <OrgID> and
<LocalID> . <LocalID> is chosen by the business entity and should not be reused to
Dell Command | Monitor 10.3 classes and properties 191