Reference Guide

Table 48. RecordLog (continued)
Property Description
LogicalDevice), the same information can be present in both the Name and
ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration for
the Enabled State of an element.
Possible values are:
● 2 = Enabled
● 3 = Disabled
● 5 = Not Applicable
● 6 = Enabled but Offline
● 7 = No Default
● 9 = Quiesce
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states of an element.
It can also indicate the transitions between these requested states. For example,
shutting down (value = 4) and starting (value = 10) are transient states between
enabled and disabled.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Enabled — Indicates that the element is or could be executing commands, will
process any queued commands, and queues new requests.
● 3 = Disabled — Indicates that the element will not execute commands and will
drop any new requests.
● 4 = Shutting Down — Indicates that the element is in the process of going to a
Disabled state.
● 5 = Not Applicable — Indicates the element does not support being enabled or
disabled.
● 6 = Enabled but Offline — Indicates that the element may be completing
commands, and will drop any new requests.
● 7 = In Test — Indicates that the element is in a test state.
● 8 = Deferred — Indicates that the element may be completing commands, but will
queue any new requests.
● 9 = Quiesce — Indicates that the element is enabled but in a restricted mode.
● 10 = Starting — Indicates that the element is in the process of going to an
Enabled state. New requests are queued.
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
HealthState
Indicates the current health of the element. This attribute expresses the health of
this element but not necessarily that of its subcomponents.
DMTF has reserved the unused portion of the continuum for additional HealthStates
in the future.
Possible values are:
● 0 = Unknown — The implementation cannot report on HealthState at this time.
● 5 = OK — The element is fully functional and is operating within normal
operational parameters and without error.
● 10 = Degraded/Warning — The element is in working order and all functionality is
provided. However, the element is not working to the best of its abilities. For
176 Dell Command | Monitor 10.3 classes and properties