Reference Guide

Table 43. IPConfigurationService (continued)
Property Description
● 6 = Enabled but Offline — Indicates that the element may be completing
commands, and will drop any new requests.
● 7 = In Test — Indicates that the element is in a test state.
● 8 = Deferred — Indicates that the element may be completing commands, but
will queue any new requests.
● 9 = Quiesce — Indicates that the element is enabled but in a restricted mode.
● 10 = Starting — Indicates that the element is in the process of going to an
Enabled state. New requests are queued.
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
Name
The Name property uniquely identifies the Service and provides an indication of the
functionality that is managed. This functionality is described in more detail in the
Description property of the object.
SystemCreationClassName
The CreationClassName of the scoping System.
SystemName
The Name of the scoping System.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change — Indicates that no transition is in progress.
● 6 = Offline
● 7 = Test
●
8 = Defer
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable — Indicates the implementation does not support
representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
DCIM_PowerUtilizationManagementService
Table 44. PowerUtilizationManagementService
Property Description
CreationClassName
Indicates the name of the class or the subclass that is used in the creation of an
instance. When used with the other key properties of this class, this property allows
all instances of this class and its subclasses to be uniquely identified.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration
for the Enabled State of an element. By default, the element is Enabled (value =
2).
Possible values are:
● 2 = Enabled
● 3 = Disabled
● 5 = Not Applicable
Dell Command | Monitor 10.3 classes and properties 161