Users Guide
Table Of Contents
- Dell Command | Monitor Version 10.4 User's Guide
- Introduction to Dell Command | Monitor 10.4
- Windows SMM Security Mitigations Table (WSMT) Compliance
- Standards and protocols for Dell Command | Monitor 10.4
- Use case scenarios using Dell Command | Monitor 10.4
- Using Dell Command | Monitor 10.4
- Polling interval setting
- RAID status reporting
- Monitoring the Dell client systems
- Application log for Dell Command | Monitor for Linux
- Detecting advance format drives
- Boot configurations
- Changing the system settings
- Managing Dell client systems locally using Dell Command | Monitor 10.4
- Managing Dell client systems remotely using Dell Command | Monitor 10.4
- Frequently asked questions for Dell Command | Monitor 10.4
- Troubleshooting steps using Dell Command | Monitor 10.4
- Unable to remotely connect to Windows Management Instrumentation
- Installation failure on systems running Windows
- BIOS setting enumeration value appears as 1
- Hapi installation fails due to the dependency of libsmbios
- CIM resources not available
- Unable to execute the commands using DCM on the systems running Ubuntu Core 16
- Other documents you may need
- Contacting Dell
CIM resources not available
While enumerating, if you receive an error as “CIM resource not available”,
Verify that the commands are executed with root privileges.
Unable to execute the commands using DCM on the
systems running Ubuntu Core 16
Ensure that the snap version on the system is 2.23 or later.
Troubleshooting steps using Dell Command | Monitor 10.4 29